Hydrogen Fueling & CNG Testing Technical Papers

Harty, R., Matheson, S., Gambone, L, McDougall, M., et al., "Investigating the Optimum Practical Hydrogen Working Pressure for Gaseous Hydrogen Fueled Vehicles", Proceedings of the SAE World Congress 2010, 10PFL-0905, April 13-15, 2010, Detroit, MI.

Schneider, J., McDougall, M., et al., "Industry-Wide Light Duty Hydrogen Vehicle Fueling Protocol up to 70MPa: Created by Math Modeling and Confirmed by System Testing", Proceedings of the National Hydrogen Association 2009, March 30 - April 3, 2009, Columbia, SC.

Schneider, J., McDougall, M., and Gambone, L., "Onboard Hydrogen Vehicle Storage Fueling Testing for the Purpose of Optimization under Extreme Conditions", Proceedings of SAE World Congress 2008, April 14-18, 2008, Detroit, MI.

McDougall, M. and Gambone, L., "Communication and Pre-Cooling Requirements for 70 MPa Hydrogen Fueling of Vehicles", Proceedings of the National Hydrogen Association Conference 2008, March 31-April 3, 2008, Sacramento, CA.

Nanalal, A. "Low Cost Light Duty Hydrogen Fill Stations", Proceedings of the Hydrogen & Fuel Cells 2007 Conference, April 30 – May 2, 2007, Vancouver, BC.

McDougall, M., Horacek, P.; "Temperature Limitations During Fueling of On-Board 70 MPa Hydrogen Storage"; Proceedings of the National Hydrogen Association Conference 2007; March 19-21, 2007; San Antonio, TX

Schneider, J., Gambone, L., McDougall, M., et al., "70 MPa Hydrogen Storage Fueling Testing", Proceedings of the Zero Regio Workshop, World Hydrogen Technologies Conference 2007, November 4-7, 2007, Montecatini, Italy.

Gambone, L. and Wong, J., "Fire Protection Strategy for Compressed Hydrogen-Powered Vehicles", 2nd International Conference on Hydrogen Safety, September 11-13, 2007, San Sebastian, Spain.

Wong, J. and Gambone, L., "70 MPa Fueling Stations for Hydrogen Vehicles", Proceedings of the 16th World Hydrogen Energy Conference, June 13-16, 2006, Lyon, France.

Schneider, J., Richards, M., Gambone, L., et al., "Evaluation of Fueling Performance Targets for Onboard 70 MPa Gaseous Hydrogen Storage Containers", Proceedings of the National Hydrogen Association Conference 2006, March 13-15, 2006, Long Beach, CA.

 Gambone, L.R., Webster, C.T. and Taira, T., "The Hydrogen 700 Project: Introducing 700 bar Compressed Hydrogen Fuel Systems for Fuel Cell Vehicles", Proceedings of the 15th World Hydrogen Energy Conference, June 27-July 2, 2004, Yokohama, Japan.

Gambone, L.R. and Webster, C.T., "The Hydrogen 700 Project: Introducing 700 bar Compressed Hydrogen Fuel Systems for Fuel Cell Vehicles", Proceedings of the 13th Canadian Hydrogen Conference, June 8-11, 2003, Vancouver, B.C.

Gambone, L.R., "ISO Standards for Compressed Hydrogen Vehicle Fuel Systems – Real World Needs", Proceedings of the 14th World Hydrogen Energy Conference, June 10-13, 2002, Montreal, Quebec.

Gambone, L., "Adaptation of CNG Components to Compressed Hydrogen Fuel Systems", The 11th Canadian Hydrogen Conference, Victoria, B.C., June 17-20, 2001.

Gambone, L., Lautman, L., Rutz, R. and Taira, T., "The Development of a Large Diameter NGV Type 3 Cylinder from Aluminum Plate", The 7th International Conference and Exhibition on Natural Gas Vehicles, Yokohama, Japan, October 17-19, 2000.

Webster, C., "Performance Testing of Compressed Hydrogen Vehicle Fuel Cylinders", The 9th Canadian Hydrogen Conference, Vancouver, B.C., Feb. 7-10, 1999.

 Webster, C. and Gambone, L., "Protective Coating Systems for NGV Cylinders", The 6th Biennial IANGV International Conference on Natural Gas Vehicles, Cologne, May 26-28, 1998.

Gambone, L. and Liss, B., "Condition of Composite Hoop-Wrapped Aluminum and Steel Cylinders Removed from NGV Service", The 6th Biennial IANGV International Conference on Natural Gas Vehicles, Cologne, May 26-28, 1998.

 Gambone, L., Oppenheimer, A. and White, N., "Performance Testing of Pressure Relief Devices for NGV Service", The 6th Biennial IANGV International Conference on Natural Gas Vehicles, Cologne, May 26-28, 1998.

 Wong, J. and Liss, B., "Overview of Acoustic Emission Techniques for the Inspection of NGV Cylinders", The 6th Biennial IANGV International Conference on Natural Gas Vehicles, Cologne, May 26-28, 1998.

Gambone, L. "Field Performance of NGV Components", The 5th Biennial IANGV International Conference on Natural Gas Vehicles, Kuala Lumpur, Sep 30-Oct 4, 1996.

Webster, C., "Safety Features of NGV Cylinder Designs", The 5th Biennial IANGV International Conference on Natural Gas Vehicles, Kuala Lumpur, Sep 30-Oct 4, 1996.

 Wong, J., "Optimization of Low Cost NGV Cylinders", The 5th Biennial IANGV International Conference on Natural Gas Vehicles, Kuala Lumpur, Sep 30-Oct 4, 1996.

Wong, J., Webster, C. and James, B., "Standard for High Pressure Cylinders for the On-borad Storage of Natural Gas as a Fuel for Automotive Vehicles", The Eighth International Conference on Pressure Vessel Technology, Montreal, July 21-26, 1996

 Bhuyan, G.S., Carter, D.H. and Brezden, W.J., "Sustained Load Cracking Characteristics of Aluminum Lined NGV Cylinders", International Journal of Pressure Vessels and Piping, 1994.

Bhuyan, G.S., "Leak-Before-Break and Fatigue Crack Growth Analysis of All-Steel On-Board Natural Gas Cylinders", Symposium on Fracture Mechanics, ASTM STP 1189, pp.498-511, 1993.

 Bhuyan, G.S., "Fitness-for-Purpose Evaluation of Ground Storage NGV Cylinders", Canadian Metallurgical Quarterly, vol.32, no.3, July-September 1993.

Akhtar, A., Wong, Y.Y., Bhuyan, G.S., Webster, C.T., Kung, D., Gambone, L.R., Neufeld, N. and Brezden, W.J., "Acoustic Emission Testing of Steel Cylinders for the Storage of Natural Gas on Vehicles", NDT&E International, vol.25, no.3, pp.112-115, 1992.

Bhuyan, G.S., "Critical Defect Sizes for NGV Cylinders Designed For a 15 Year Life", Proceedings of the 3rd IANGV Conference (NGV '92), vol.4, pp.432-446, 1992.

Webster, C.T., "The SSC Resistance of NGV Cylinders in H2S Environments", Proceedings of the 3rd IANGV Conference (NGV '92), vol.5, pp.87-102, 1992.

Bhuyan, G.S., "Effects of Composite Damage on the Fatigue Behaviour of the Metal Lined Hoop-Wrapped Cylinders", Journal of Pressure Vessel Technology, vol.114, pp.120-123, 1992.

 Akhtar, A. and Carter, D.H., "NGV - Safety Regulation and the Fitness-for-Purpose Philosophy (Keynote address)", Proceedings of the IANGV Seminar on NGV Safety Regulation, Toronto, June 1991.

 Bhuyan, G.S., Akhtar, A. and Webster, C.T., "Effect of Hydrostatic Retest on the Fatigue Behaviour of a Steel Gas Cylinder", Journal of Pressure Vessel Technology, vol.113, pp.556-559, 1991.

 Webster, C.T., "The Certification of NGV Cylinders", Proceedings of the Continental Conference on NGV, Norma, OK, June 1991.

 Bhuyan, G,.S., Akhtar, A., Webster, C.T., Wong, J.Y. and Carter, D.H., "Integrity of On-Board and Ground Storage NGV Cylinders", Proceedings of the 2nd IANGV Conference (NGV '90), paper #31, Buenos Aires, 1990.

Akhtar, A., "NGV - On-Board Cylinders: a Life Cycle Perspective", Proceedings of the 4th International Congress and Exhibition on the Use of Methane in the Transport Sector, Bologna, Italy, pp.180-196, 1990.

Bhuyan, G.S. and Akhtar, A., "Assessment of Integrity of the On-Board NGV Steel Cylinders", Proceedings of the 4th SAS World Conference, STRUCENT on Structural Engineering, Los Angeles, CA, pp.303-315, 1989.

 Bhuyan, G.S. and Brezden, W.J., "Influence of Environmental Variables and Intermittent Overloading on Fatigue Crack Growth in On-Board NGV Cylinder Steel", International Journal of Pressure Vessels and Piping, vol.40, pp.139-149, 1989.

Akhtar, A., "Elements of a Proposed International Standard for On-Board NGV Cylinders", Proceedings of the 1st IANGV International Seminar on NGV Cylinders, Vancouver, BC, paper #3.1, October 1989.

 Bhuyan, G.S., "Non-Linear Finite Element Analysis - a Tool for the Evaluation of NGV Cylinder Designs", Proceedings of the 1st IANGV International Seminar on NGV Cylinders, Vancouver, BC, paper #5.1, October 1989.

 Bhuyan, G.S., "Fatigue Crack Growth in NGV Steel Cylinders", Proceedings of the 1st IANGV International Seminar on NGV Cylinders, Vancouver, BC, paper #4.5, October 1989.

Webster, C.T., "Developments in North American NGV Standards", Proceedings of the 1st IANGV International Seminar on NGV Cylinders, Vancouver, BC, paper #2.2, October 1989.

Akhtar, A. and Heenan, J., "Advanced On-Board Storage of Natural Gas", ASME Energy Source Technology Conference and Exhibition, paper #80, Houston, TX, January 1989.

 Akhtar, A. and Heenan, J., "Advanced On-Board Storage of Natural Gas", ASME Energy Source Technology Conference and Exhibition, paper #80, Houston, TX, January 1989.

Back

Read More

To access technical papers related to your business needs, please fill out our inquiry form.

Inquire